Skip to main content
Researchers are working to tailor salmon farm impact modelling to Scottish waters. Photo: SAIC.
Researchers are working to tailor salmon farm impact modelling to Scottish waters. Photo: SAIC.

A consortium of organisations in Scotland is developing a more accurate way of predicting how salmon farms interact with their surrounding environment.

The work should help inform decisions on future farm locations, the development of existing farms, and enhance the sector’s overall sustainability.

The Scottish Association for Marine Science (SAMS), Scottish Salmon Producers Organisation (SSPO), Sustainable Aquaculture Innovation Centre (SAIC), and the University of Dundee are exploring how the model used to understand the interaction between fish farms and the seabed beneath them – known as NewDEPOMOD – can better reflect the physical and ecological conditions in different parts of Scotland.

Sediment transport dynamics

The project builds on the work undertaken over the last two years by SAMS, SSPO, and SAIC – in consultation with the regulator, the Scottish Environment Protection Agency (SEPA) – by adding expertise in environmental fluid mechanics and sediment transport dynamics from the University of Dundee.

Researchers using the university’s state-of-the-art laboratory facilities will mimic the hydrodynamic conditions and sediment bed characteristics in different types of waters in Scotland – from sheltered sea lochs to more exposed coastal waters with rocky, sandy, or muddy seabeds. They will then model the settling, deposition, and resuspension of waste matter – fish faeces and uneaten feed - from fish farms to see how they will react within these environments.

Built for Scotland

In a press release, SAIC said the addition of these trials will improve the quality of information and the accuracy of the predictions used to determine the best locations for salmon farms in Scottish waters.

While NewDEPOMOD is successfully used by the aquaculture sector globally, its effectiveness is enhanced where specific research and data are available for factors such as location, hydrography, and local species. Through this collaborative project, the software will be further developed to improve these parameters in a Scottish context.

Helena Reinardy:
Helena Reinardy: "Scotland is leading the way." Photo: SAMS.

Helena Reinardy, teaching fellow and researcher at SAMS, said: “Scotland is leading the way in developing NewDEPOMOD, creating a model that is more tailored to the conditions at sites across the country.

“The first phase of this project set the foundations for defining the parameters that inform decisions about fish farms locations, and this next phase will progress that even further with the addition of the University of Dundee. Ultimately, we want to create an interface between the sector and regulators that is not only useful for them both but informed by the best science available too.”

We want everyone involved to have maximum confidence in the models used to locate fish farms.

Alan Cuthbertson, senior lecturer in environmental fluid mechanics
Alan Cuthbertson: Lab will test a range of different scenarios that better reflect conditions in Scotland’s coastal waters. Photo: Dundee University.
Alan Cuthbertson: Lab will test a range of different scenarios that better reflect conditions in Scotland’s coastal waters. Photo: Dundee University.

Alan Cuthbertson, senior lecturer in environmental fluid mechanics at the University of Dundee, said: “We’re looking to help create a model that will deliver better predictions about the dispersal and settling patterns of waste materials from fish farms.

“We want everyone involved to have maximum confidence in the models used to locate fish farms and predict their environmental impact, minimise impact on the seabed, and ensure the sector is as sustainable as possible.

“In the coming months, we will use our labs to verify the settling and resuspension rates of waste materials and test a range of different scenarios that better reflect conditions in Scotland’s coastal waters and apply these to NewDEPOMOD.”

The project will also provide the salmon farming sector with training and guidelines for working with the new models, as well as an enhanced software package and user interface for individuals using NewDEPOMOD. The consortium will also organise a series of workshops to facilitate communication between the sector and regulators.

Iain Berrill: Accurate predictions are key. Photo: SSPO.
Iain Berrill: Accurate predictions are key. Photo: SSPO.

Investing heavily

Iain Berrill, head of technical at the SSPO, said: “We are very supportive of this project and the sector is investing heavily in it, to ensure the outcomes are of use to all concerned.

“Being able to accurately predict how we interact with our environment is key, not only for the development of new and existing farms, but to our sector’s wider sustainability objectives, as presented in our Sustainability Charter.”

SAIC chief executive Heather Jones said the results of the project would be a key part of ensuring the sector is as sustainable as it can be in the years ahead.